Industrial Desiccant & chemicals

Approx. Rs 1,650 / KilogramGet Latest Price

We do not provide Used Copper Catalyst

Copper Catalyst.

Product Details:

Grade Standard Technical Grade

Physical State Granules, Crystals

Product Description:

We are extremely engaged in providing Copper Catalyst for Nitrogen De-oxo. These products are recognized in the market for their top features.

Copper catalyst for PSA Nitrogen Generator Copper De-Oxo

· Genuine de-oxo copper catalyst for your nitrogen generator

· Guaranteed performance

· Ready stock

· Immediate delivery

· Irrespective of which make Nitrogen generator you have, we can supply you the correct copper catalyst

What is Copper Catalyst?

For production of high purity gases such as Nitrogen, requires use of high activity catalysts for the removal of impurities. Oxygen is a major impurity in inert or reactive gases and therefore reducing its concentration is a subject of continual interest. Chemisorption with subsequent catalytic reaction always offers an economical and effective way to purify gases. Copper catalysts are frequently used in the above described applications. The goal of using copper catalyst is the removal of oxygen from nitrogen, thereby delivering high quality inert gas with ppm levels of Oxygen remaining.

What levels of Oxygen will remain after catalytic reaction?

Copper catalyst removes oxygen from gases containing a maximum of 1.0 to 1.5 vol.% O2. In this case, it is possible to achieve a purity of 1-5 ppm. For the adsorption of oxygen, room temperature is sufficient. The total amount of oxygen that is absorbed by the catalyst, however, largely depends on the temperature.

Is the catalyst supplied - ready-to-use?

Catalyst is always supplied in unreduced state.

How is the catalyst prepared for use?

The catalyst can be activated in either a tubular reactor with heat exchange or in an adiabatic-type reactor. The reduction starts in either reactor by heating the catalyst in a stream of nitrogen to a temperature of 140 to 160°C. Subsequently, hydrogen is added to the nitrogen at such a rate that a temperature of 250°C is not exceeded. The reduction should be completed at a temperature of min. 230°C with undiluted hydrogen.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: All over india
• Delivery Time: As per clients requirements

Approx. Rs 950 / KilogramGet Latest Price

Nickel Catalyst.
Product Description:
Nickel Catalyst is provided with the properties.

It is used in the ammonia decomposing furnace to decompose the HN3 and HCN into N2, H2 and CO2.
and so as effectively Purify coke Gas for Sake of environmental protection and prevent the equipments for corrosion 

Technical Specifications

 Application:-

It is mainly used in the ammonia plant of the secondary rectifier of hydrocarbons and ammonia decomposition equipment,

 Using gaseous hydrocarbons as raw material.

 Mostly experiment

Ammonia cracker, Endo gas plant

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: All over India
• Production Capacity: 500 Kg
• Delivery Time: As Per clients requirements
• Packaging Details: As Per client requirements

Approx. Rs 130 / KilogramGet Latest Price

Products technical details

A global supplier of qualified Air Dryer Desiccant for industrial air drying applications. Air drying alumina balls are use for compressed air drying, PSA drying and heated & heatless air dryer, heat of combustion and other industrial applications.

Activated Alumina Products/Uses
Activated Alumina PSG used for air drying purpose from different air dryers including refrigerated, compressed, heated or heatless, HOC & van.

Technical Parameter
Alumina Balls Size 1-3mm, 2-5mm, 3-5mm, 5-8mm, 8-10mm

Bulk density (gm / lit) - 0.700 - 0.8000.700 - 0.800

BET Surface area (m₂ / gm) - 345 - 415

Pore Volume (cc / gm) - 0.40 - 0.50

Adsorption Capacity (60 % RH) - 21.5

Loss of Attrition (%) - 0.2

Crushing Strength (kgf / cm2) - 8-12

LOI (300oC-1000oC) - 6-8

Al₂O₃ (By difference) - Min 94

Chemical Composition (%)

Na₂O NMT 0.5

Fe₂O₃ NMT 0.05

SiO₂ NMT 0.10

Additional Information

Item Code PSG ENG

Packaging Details Polyliner with HDPE bag

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: All over India
• Production Capacity: 1000 kg
• Delivery Time: 2-3 week
• Packaging Details: 25 kg ,40 kg, 150 kg,

Approx. Rs 22,500 / KilogramGet Latest Price

Classification: Catalyst

1.Palladium content: 0.3%, 0.5%, 1.0%
2. Palladium catalyst Grade: Industrial grade
3. Palladium catalyst Granularity: 100mesh(or following your demand)
4. Moisture: ≤ 3.0%
5. Features: Good hydrogenation conversion, selectivity and stable performance
Operation instructions:-

The product is already activated and could be loaded and used directly. Whether should the deoxy genate be pre-heated (to 50-80 ° C) or not depends onoxygen content in raw gas. The working temperature should be lower than 450 ° C
Specifications:
Appearance: Coconut shell flake
Pd content: 0.48-0.52
Particle size %: ≥ 95
Crushing strength: ≥ 40
Specific surface area: 1000-1300
Bulk density g/ml: 0.4-0.5
Abrasion %: ≤ 1
Reaction recovery %: ≥ 99

Technical Specification

Use:
Nitrogen or argon separated from air could be purified up to 1 ppm oxygen content after on deoxygenating step. The oxygen content can be reduced to 0.1 ppm. Palladium catalyst Application: It's a kind of high efficient deoxidizer, Can be used for hydrogen, nitrogen and argon, krypton etc. Various gas the depth purification. Widely used in metallurgy, chemical industry, light industry, electronic industries

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: All over india
• Delivery Time: As Per client
• Packaging Details: As Per Client requirements

Approx. Rs 14,500 / KilogramGet Latest Price

We do not provide Used Palladium Catalyst

Palladium Catalyst.

Classification: Catalyst.

1. Palladium content: 0.3%, 0.5%, 1.0%
2. Palladium catalyst Grade: Industrial grade
3. Palladium catalyst Granularity: 100mesh(or following your demand)
4. Moisture: ≤ 3.0%
5. Features: Good hydrogenation conversion, selectivity and stable performance

Operation instructions:

The product is already activated and could be loaded and used directly.
Whether should the deoxy genate be pre-heated (to 50-80 ° C) or not depends on the oxygen content in raw gas.
The working temperature should be lower than 450 ° C

Specifications:

Appearance: Palladium Catalyst Coated on alumina

Pd content: 0.48-0.52
Particle size %: ≥ 95
Crushing strength: ≥ 40
Specific surface area: 1000-1300
Bulk density g/ml: 0.4-0.5
Abrasion %: ≤ 1
Reaction recovery %: ≥ 99

Technical Specification:

Use:

Nitrogen or argon separated from air could be purified up to 1 ppm oxygen content after on deoxygenating step.
The oxygen content can be reduced to 0.1 ppm.

Palladium catalyst Application:-

It's a kind of high efficient deoxidizer, Can be used for hydrogen, nitrogen and argon, krypton etc. Various gas the depth purification. Widely used in metallurgy, chemical industry, light industry, electronic industries.

Storage:

Avoid damping and any adsorption of water or organic substance before use. Otherwise it must be regenerated.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: All over india
• Delivery Time: As Per client Requirements

Approx. Rs 900 / KilogramGet Latest Price

CMS (Carbon molecular Sieve) for PSA Nitrogen Gas Plants

AS CMS is most critical part of PSA Nitrogen Gas Plants so We keeps always in stock Carbo-Tech / Kuraray make/Japan CMS, we offer very attractive commercial terms & condition for Carbo-Tech / Kuraray make/Japan CMS ( Carbon Molecular Sieve )

Description of Carbon Molecular Sieve (CMS)

CMS (Carbon Molecular Sieve) is being used as absorbent for PSA NITROGEN GAS PLANTS Carbon molecular sieve specializes in separating oxygen from nitrogen under the normal temperature and pressure, an important part in natural gas processing. This process is done with a PSA (Pressure Swing Adsorption) device. Carbon molecular sieve can adsorbing material less than 10 angstroms, various pore sizes can be creased for Carbon molecular sieve.

Nitrogen Recovery with Respect of Pressure and Nitrogen Purity is as per following table

Physical Property of Carbon Molecular Sieve (CMS

Packaging

20kg/40kg PVC plastic Container .

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: All over india
• Delivery Time: As Per Client requirements