PSG Engineering Company
Hapur, Uttar Pradesh
GST No. 09DFIPS9046Q1Z9
TrustSEAL Verified
Call 08046062558
80% Response Rate
SEND EMAIL
PSG Engineering co are manufacturer of High Quality Nitrogen Gas Plant & Ammonia Crecker with purifire Plant from India Our PSA Nitrogen Gas Plant are of High Quality working on the renowned PSA Technology Industry standard. If you are looking for better Purity Nitrogen , you need is select best PSA Technology PSA Nitrogen Gas Plant ,PSA Plant , Ammonia crecker with Purifire cr ammonia purity in the renge of 75% to 99.5% & Nitrogen purity in the range of 99-99.9999& can be achieved through our PSA nitrogen Gas Plant, PSA plant & ammonia crecker .
Product Details:
| Minimum Order Quantity | 1 Unit |
| Design | Standard |
| Automatic Grade | Semi- Automatic |
| Capacity | 5nm3 to 100 nm3 |
| Pressure: | Up to 1 kg |
| Purity: | 100 PPM TO 1-PPM |
| Capacity per hour: | 1Nm3/hr to 100 Nm3/hr |
Ammonia Cracker with Purifier.
PSG has been Manufacturing and Supplying very reliable and efficient Ammonia Cracking Unit for over three decades. Our experience and knowledge of ammonia cracking is the best in the industry and we are looking up to as the industry leaders for these types of Hydrogen Generators.
Technical Specifications:
Capacity: 1Nm3/hr to 100 Nm3/hr
Purity: 100 PPM TO 1-PPM un-Cracked Ammonia
Pressure: Up to 1 kg
Dew Point: up to (-) 80°C
Technical Specifications:
Ammonia Cracking Hydrogen Generators are Catalytic cracking units in which Ammonia (NH3) is disassociated to Hydrogen and Nitrogen Gas.
2NH3 = 3H2 + N2
Refrigeration grade Ammonia is from Cylinder or Storage Tank is used as feed. The Product Gas has 75% Hydrogen and 25% Nitrogen; this gas is further purified in a Molecular Sieves unit by removing un-cracked Ammonia and moisture.
Low Operating Cost:
This is very Low Investment in such Hydrogen Gas. Additionally, as very little electrical Power or LPG gas required for its operating, the cost of Hydrogen produced is also very low. Both of these factors allow the user to recover the investment cost on PSG Ammonia cracker very quickly
PSG incorporates the use of skids and designing, these plants in compact and modular. This feature allows easy transportation and easy installation of the systems at your site. Our Erection Engineer is present at site to oversee installation and also assist with commissioning and training of your personnel. These units to withstand harsh operating condition and very normal maintenance for its smooth operation
Applications:-
For providing atmosphere In Hydrogen Bell
annealing furnace in cold rolling Industries
Stainless steel wire annealing
Hydrogenation of castor oil / non edible oil’
Metal Powder annealing
Brazing application
Continuous galvanizing lines
Bimetal products annealing
Sintered products annealing
For providing reduction in bulk drug
Heat treatment
Salient Features:
Low Capital cost
Virtually maintenance free
Low running cost
Available in capacities
Very cost effective substitute for water Electrolysis Plants in terms of power, capital cost and running cost
Available as electrically heated/oil or gas fired
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Automatic Grade | Semi- Automatic |
| Design | Standard |
| Capacity | 5 Nm3 -200 Nm3 |
| Material | Mild Steel,Carbon Steel |
| Dew Point | (-) 70 deg c |
| Operating Air Pressure | 6.5 kg |
| Purity | 90%-99.9999% |
| Condition | New |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Capacity | 5 Nm3 to 200 Nm3 |
| Dew Point | Up to (-) 70 ~C |
| Purity | Up to 99.999% |
| Pressure | Up To 5.5 Kg Per Square Cm |
| Min Order Quantity | 1 |
| Start up Time | 10 to 15 Minutes |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Automation Grade | Semi- Automatic |
| Design | Standard |
| Capacity | 5 Nm3 to 200Nm3 |
| Brand | PSG Engineering Co |
| Material | Mild Steel,Carbon Steel |
| Flow Rate | As Per Client Requirements |
| Purity | 98,99,99.5 To 99.999 |
| Pressure | 5-6 Kg/ Cm2 |
Nitrogen Plant
Technical Specifications.
Capacity 5 Nm3/hr to 200Nm3/hr
Purity Up to 99.9999%
Pressure Up to 10 Bar
Dew Point up to (-) 80~C
PSA Principle.
This Process consists of 2 beds filled with carbon Molecular Sieves (CMS). When PRE-Filtered compressed air is passed thought one CMS bed, Nitrogen comes out as the product gas. The waste gas (oxygen, carbon dioxide, etc) is discharged back into atmosphere. Upon saturated of the CMS bed, the process switches nitrogen regeneration to other bed, while allowing the saturated bed to undergo regeneration by depressurization to atmospheric pressure. This ensures continuous supply of Nitrogen to your System.
Salient Features of PSA Plants.
1 Capacity up to 200Nm3/hr
2 No fuel is required
3 Purity up to 99.999% is easily achievable
4 Low Capitals Coast
5 Start up time of only 10 to 15 Minutes
PSA Plant Models.
Models | ||||
Gas | MS-(L) | MS-(H) | DEOXO | COPPER-DX |
OXYGEN | 0.1 to 2% | 10 to 500 PPM | 1 to 3 PPM | 1 PPM (Max) |
HYDROGEN | Nil | Nil | 0.5% | Nil |
NITROGEN | 98 to 99% | 99.5 to 99.999% | Balance | 99.9999% |
DEW-POINT | (-)40 DegreeC to(-)60 DegreeC | (-)40 DegreeC to(-)60 DegreeC |
| (-)40 DegreeC to(-)80 DegreeC |
Applications.
1 Refineries and chemical plants
2 Bearwine and juices
3 Oil and gas platforms
4 Storage of fruits and vegetables
5 Metal-treatment
6 Electronics/Laboratory applications
7 Tankers and storage tanks
8 Food Packaging
9 Pipelines
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Number |
| Automation Grade | HU Grade & IN 519 |
| Design | Standard |
| Country of Origin | Made in India |
Additional Information:
Product Details:
| Automatic Grade | Semi- Automatic |
| Design | Standard |
| Capacity | 5nm3 to 200 nm3 |
| Brand | PSG Engineering Co |
| Operating Air Pressure | 6.5 kg |
| Flow Rate | As Per client requirements |
| Dew Point | (-) 60 deg c |
| Condition | New |
Additional Information: